Soft cord / 软线

Soft cord is twisted or threaded raw yarn which is coated with one or several substrates to create adhesion to rubber mixtures. Primary features are soft haptics, low stiffness and the water-based chemical system.

软线是涂有一种或几种基底的加捻或螺纹生纱,其基底对橡胶混合物产生粘着力。其主要 产品特征是质软、硬度低和水溶性化学系统。


Stiff cord / 硬线

Stiff cord is twisted yarn which is impregnated with solvent-free or solvent-based fittings. Multi-layer systems are possible as well. The pre-dip ensures a rigidity or cut resistance defined by the customer and results to the filaments of the individual yarn being glued in the twist system.



Specific yarn / 特殊纱线

Specific yarn by MEP represent a significant expansion of our portfolio, adding to our familiar product range of raw materials, fibers and rubber-friendly fittings. We are open for any type of request regarding new raw materials and fibers and also offer coating and fitting services with alternative substrates.
米勒特殊纱线显示出我们产品系列的显著扩展,扩大了原材料、纤维和橡胶浸胶的原有产 品范围。


Untreated yarn / 非浸胶纱线

Untreated yarn are fiber raw materials which are twisted up as yarn or twisted together as thread. Typically, this technical yarn is not coated. We use different materials in different presentations to manufacture twisted yarn and thread.



Soft cord, stiff cord and other technical yarn at MEHLER ENGINEERED PRODUCTS
米勒工程线绳集团的软线、硬线和其它工业 纱线

As reinforcing materials, our technical yarns influence different functions of the final product. Those functions include size modifications under operational conditions, bursting strength as well as tensile strength and elasticity in longitudinal direction. Rubber-friendly fitted yarns are used in air condition, brake, hydraulic and fuel hoses, toothed belts, fan belts and other drive belts as well as various tires and air springs. The adhesion of the yarn to the rubber creates synergy effects between the textile and rubber in the final products. Low strength and partially low e-modules represent significant weaknesses of rubber in applications in technical items. The required properties of the final product can only be achieved through the combination with textile reinforcing materials, meaning the technical yarn by MEP. The selection of the coating follows the type of rubber as it is what creates the adhesion between textile and rubber. Coating is generally done using RFL dips which consist of latex, a resorcinol pre-condensate and formaldehyde dissolved in water or other solvents. The fiber raw material is generally selected in accordance with the mechanical requirements of the final product. Polyester (PES) creates a high degree of strength in combination with high shrinking forces and low elasticity. Polyamides (PA) create a high degree of elasticity while aramids (AR) will lead to high strength with low elasticity.

作为增强材料,我们的工业纱线影响着最终产品的不同功能。这些功能包括操作条件下的 尺寸变动、爆破强度以及纵向拉伸强度和弹性。橡胶友好型浸胶纱线用于空调、刹车、液 压和燃油软管、齿形带、风扇皮带等传动皮带及各种轮胎和空气弹簧中。纱线与橡胶之间 的粘合产生了最终产品中纺织品与橡胶之间的协同效应。低强度和部分低电子模块呈现出 技术项目中应用橡胶的显著弱点。最终产品的必要性能只有通过与纺织增强材料(即米勒 工业纱线)相结合才能实现。涂层的选择依据橡胶的类型,因为涂层产生纺织品与橡胶之 间的粘合力。涂层一般采用RFL 胶浆,这种胶浆是由乳胶、间苯二酚预缩合物和溶解于 水或其他溶剂中的甲醛合成的。纤维原料一般根据最终产品的力学要求进行选择。聚酯 (PES)高收缩力、低弹性且高强度。聚酯纤维(PA)高弹性,芳纶(AR)高强度且低 弹性。